Posted on Leave a comment

Best Seller – Permabond ET515 (50ml)

Best Seller May

Now that May has come to an end its time to announce the #BestSeller for the month. The top spot goes to @Permabonds product Permabond ET515 (50ml)!

Permabond ET515 (50Ml) is a 1:1 mixable epoxy adhesive. ET515 is a semi-flexible toughened adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites. It’s a relatively fast curing epoxy; reaching handling strength in 20-30 minutes. It is ideal for bonding different materials where differential thermal expansion is anticipated.

Please note that 50ml cartridges require a manual dispensing gun (sold separately).

Features and Benefits:

  • Adhesion to a wide variety of substrates
  • Full cure at room temperature
  • Easy to apply
  • Semi-flexible
  • Good impact strength

#Permabond #May #protectingyourelectronics

Posted on Leave a comment

Best Seller – April

Best Seller.00 00 01 13.Still014

Now that May is upon us it is time to announce the #BestSeller for April which was @permabond product Permabond ET5428 – Black (50ml) !

Permabond ET5428 is a thixotropic two part adhesive with excellent resistance to impact and vibration. The controlled flow properties as well as its ease of mixing and application, enables the adhesive to be used where gap filling is required. Permabond ET5428 has been found to provide exceptional performance even at elevated temperatures. Permabond ET5428 has been specifically formulated for use in applications requiring toughness and high strength and shows special benefits in the construction of composite assemblies

Features and Benefits:

  • Ideal for bonding composite materials
  • Easy to apply
  • High shear and peel strength
  • Rapid cure speed
  • High temperature resistance
  • Colour matched for FRP bonding

#Permabond #Adhesive #protectingyourelectronics

Posted on Leave a comment

Best Seller – March

Best Seller. March

Now that April is among us its time to announce the #BestSeller for March!

The top spot for this particular month is held by @Permabond with their TA4200 (50ml) product

Permabond TA4200 is a two part, rapid curing 1:1 toughened acrylic adhesive. Its toughening makes it ideal for structural bonding and for bonding dissimilar materials where differential thermal expansion and contraction could be an issue. It cures rapidly at room temperature and has good gap filling properties.
Storage Temp 2 to 7°C
Please note that 50ml cartridges require a manual dispensing gun (sold separately).

Features and Benefits:

  • Adhesion to a wide variety of substrates
  • Fast cure at room temperature
  • High shear and peel strength
  • Good impact strength
  • Good chemical resistance
  • Rapid strength development

#Permabond #protectingyourelectronics #March

Posted on Leave a comment

Permabond Best Seller

Best Seller.00 00 01 13.Still012

We couldn’t have #Permabond week without revealing our @Permabond #BestSeller to you all!

Our Permabond best seller is none other than Permabond 2011 gel (20g)

Permabond 2011 is a non-drip, non-sagging, fast setting cyanoacrylate suitable for use on vertical and porous substrates. This material can be used on metals, plastics, elastomers, ceramics and wood. Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. Strong bonds are developed extremely fast and on a great variety of materials. These properties make cyanoacrylates ideal adhesives for high speed production lines.

Features and Benefits:

  • Thixotropic
  • Storage Temperature: 2 to 7°C
  • Surface insensitive
  • Fast cure
  • Easy to apply and dispense
  • High temperature resistance
  • Maximum gap filling capability

Take a look at the rest of the Week’s content here – https://www.hitek-ltd.co.uk/permabond-week-2024/

#Permabond #protectingyourelectronics #PermabondWeek

Posted on Leave a comment

Best seller – February

Best Seller Feb

As March is now upon us it is time to announce Februarys #bestseller!

The top spot for this particular month is held by @Henkel with their Stycast 2850FT (1kg) product.

Features and Benefits:

  • General Purpose
  • Low Viscosity
  • Cures at Room Temperature
  • Good Machinability
  • Reduced Abrasion
  • Good Chemical Resistance

Stycast 2850FT is recommended for the encapsulation of components that require heat dissipation and thermal shock properties. A catalyst is required for this product and a good recommendation would be Catalyst 9.

#Henkel #channelpartners #protectingyourelectronics

Posted on Leave a comment

January Best Seller

January best seller

It is the beginning of a new month which means its time to reveal Januarys Best Seller.

And for the first month of 2024 @Permabond takes the top spot with their ET500 (25ml) product.

Permabond ET500 is a two-part epoxy adhesive that sets quickly and bonds to a wide range of materials, including wood, metal, ceramics, and some plastics and composites. It cures at room temperature in just 5 minutes, making it ideal for general-purpose bonding.

#Permabond #January #BestSeller

Posted on Leave a comment

December Best Seller

December best seller art

As the new year is now officially here it is time to announce our December #BestSeller.

For the last month of 2023 Permabond takes the top spot this time with their 105 (20g) product

Permabond 105 is a low viscosity high purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber. The product has got a storage temperature range of 2 to 7°C and it is 100% reactive no solvents.

Find all of our best sellers here: Best Sellers 2023 | HITEK Electronic Materials LTD (hitek-ltd.co.uk)

Posted on Leave a comment

November Best Seller – Permabond ET536 (50ml)

As the last month of the year is now upon us it is time to announce our November #BestSeller.

Once again Permabond takes the top spot on our website this time with their ET536 (50ml) product.

Permabond ET536 is a two-part, 1:1 mixable epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites. This product forms tough bonds providing high peel resistance and high shear strength. The extended work life of this product allows for adjustment and makes it more suitable for larger applications. Permabond ET536 has good impact strength and chemical resistance, a high shear and peel strength, and is easy to apply.