Category: Product spotlight

Posted on by — Leave a comment

Product Spotlight – Cho-Therm 1642 and Primer 1087 (277g Kit)

Todays #ProductSpotlight focuses in on Cho-Therm 1642 and Primer 1087 (277g Kit)!

Cho-Therm 1642 is a two-part thermally conductive sealant. Combining the features of Ceramics and silicone. This product doesn’t require water vapour to cure. The material has a mix ratio of 100:3 which is decided by their weight. Combining the two-part Cho-Therm 1642 with Primer 1087 allows for a permanent bond to be formed. 

Cho-Therm 1642 & Primer 1087 (277g kit)

Cho-Therm 1642 & Primer 1087 (277g kit)

£225.29 ex VAT
Shop now

Features and Benefits:

  • Thermally conductive
  • Electrically insulating
  • Easy to use
  • Long working life
  • Good for thick applications

#Chomerics #Adhesive #protectingyourelectronics

Posted on by — Leave a comment

Product spotlights – End of 2024Product spotlightsProduct spotlights – End of 2024

Missed any of our #ProductSpotlights this year?

Don’t fret, we have you covered. Visit the webpage below to find all the products we have been raving about this year. From Adhesives to Yarn, we’ve aimed to provide you with a wide variety of products from our suppliers this year. With the last shipping date closing in fast for this year we want to thank all our suppliers for the products we are able to offer, to #protectyourelectronics.

Take a look at our collection here – https://www.hitek-ltd.co.uk/category/updates/product-spotlight/

#Chomerics #Henkel #Permabond #Shieldex #ABSTechnics #HITEK-nologySolutions #Orbel #Cortec

Posted on by — Leave a comment

Product Spotlight – Shieldex Nora Dell Fabric

Today’s #ProductSpotlight is on @Shieldex Nora Dell.

A woven solution from Shieldex, this fabric offers a high level of thermal and electrical conductivity. Available as 500 x650mm or 1000x1300mm sizing this product provides shielding up to 56db in a 26-40 GHz frequency range. typically this product is used for most if not all technical situations that require high conductivity and shielding.

Shieldex Nora Dell Fabric

Shieldex Nora Dell Fabric

£56.93 – £134.52 ex VAT
Shop now

Features and benefits

  • Ni/Cu/Ag plated polyamide fabric.
  • Surface resistivity: average 0.009 ?/m2.
  • Shielding effectiveness : Average up to 95 dB from 300 MHz to 10 GHz.

#Shieldex #Fabric #protectingyourelectronics

Posted on by — Leave a comment

Product Spotlight – Bergquist Gap Pad TGP HC3000!

Today’s #ProductSpotlight focuses on @Henkel Bergquist Gap Pad TGP HC3000!

BERGQUIST GAP PAD TGP HC3000 is a gap filling material specifically designed for applications where components need a gentle touch. This soft and compliant material easily fills gaps and conforms to uneven surfaces, all while delivering impressive thermal performance (3.0 W/m-K).

BERGQUIST GAP PAD TGP HC3000

BERGQUIST GAP PAD TGP HC3000

Part Number: GPHC3.0-0.040-02-0816

£73.80 ex VAT
Shop now

Features and Benefits:

  • Thermal Conductivity: 3.0 W/m-K
  • High-compliance, low compression stress
  • Fiberglass reinforced for shear and tear resistance

#ChannelPartners #ThermalManagement #protectingyourelectronics

Posted on by — Leave a comment

Product Spotlight – Cho-Foil CCJ 18-201-0050

Today’s #ProductSpotlight focuses on @Parker Chomerics Cho-Foil CCJ 18-201-0050!

@Parker Chomerics’ CHO-FOIL® metal foil tapes provide an economical solution to applications requiring excellent electrical conductivity across substrates. These foil tapes can provide a low impedance connection between a braided cable shield and the metal connector back shell in moulded cables. Due to the highly conductive pressure sensitive acrylic adhesive (PSA), the tape can provide an effective shielded cable assembly without the need for soldering the tape to the braid 

Cho-Foil CCJ

Cho-Foil CCJ

Part Number: 18-201-0050

£33.60 – £41.35 ex VAT
Shop now

Features and Benefits:

  • Aluminium
  • Available in 16.45m or 32.91m rolls lengths
  • • Foil thickness 0.0508mm
  • Supplied with single sided conductive acrylic pressure sensitive adhesive
  • Temperature range from -40°C to +400°C
  • Electrical resistance of <0.0016 ohms/cm²
  • UL94 V-0 compliant

#Tapes #Thermalmanagement #protectingyourelectronics

Posted on by — Leave a comment

Product Spotlight – LOCTITE STYCAST 2651-40 W1

Today’s #ProductSpotlight focuses on @Henkel LOCTITE STYCAST 2651-40 W1

STYCAST 2651-40 W1 is a epoxy encapsulant designed for general potting and encapsulation applications. This product also has the ability to be cured at room temperature or an elevated temperature environment.

Stycast 2651-40 W1

Stycast 2651-40 W1

Weight: 1kg, Variant: No Catalyst

£205.41 ex VAT
Shop now

Features and Benefits

Low viscosity
Room temperature cure capability
Can be used with a variety of catalysts

#ChannelPartners #Adhesives #protectingyourelectronics

Posted on by — Leave a comment

Product Spotlight – Cho-Therm 62-15-0808-1671 (with PSA)

Today’s #ProductSpotlight focuses on @ParkerChomerics Cho-Therm 62-15-0808-1671 (with PSA)!

Cho-Therm insulator pads are designed for use where thermal, dielectric and mechanical properties are needed at their highest level. With a solid history spanning multiple decades in varying situations, Cho-Therm is the go-to product for industrial, Aerospace and Military applications 

Cho-Therm 62-15-0808-1671 (With PSA)

Cho-Therm 62-15-0808-1671 (With PSA)

£129.96 – £146.20 ex VAT
Shop now

Features and Benefits:

  • 203mm x 203mm sheet with adhesive backing
  • Excellent thermal properties
  • High dielectric strength
  • Fibreglass cloth reinforced 
  • Excellent mechanical strength and puncture resistance

#Thermal #InsulatorPads #Cho-therm #protectingyourelectronics

Posted on by — Leave a comment

Product Spotlight – Polastrip 07-0201-0158-77

Today’s #ProductSpotlight focuses on @ParkerChomerics Polastrip 07-0201-0158-77!

Polastrip is a type of sponge material capable of shielding against electromagnetic interference. Available in different sizes it can easily be used in many different situations. With less force being needed to compress the material it provides greater strength over traditional methods of solving EMI shielding.

Polastrip 07-0201-0158-77

Polastrip 07-0201-0158-77

Available for Quote
Shop now

Features and Benefits:

  • Low hardness
  • Reduced gasket load
  • Multiple wire alloy options
  • Cured in place-oriented wires
  • Available as strips, sheets and converted gaskets

#Chomerics #POLA #protectingyourelectronics

Posted on by — Leave a comment

Product Spotlight – Ablestik 59c

Todays #ProductSpotlight focuses in on Loctite Ablestik 59c!

Loctite ABLESTIK 59C is a high-temperature, thixotropic adhesive designed for applications that need electrical conductivity and a minimal need for a high bond strength. This product can be used with a variety of catalysts. 

Ablestik 59c

Ablestik 59c

Weight: 100g, Variant: No Catalyst

£828.60 ex VAT
Shop now

Features and Benefits:

  • Thixotropic 
  • Electrically conductive 
  • Thermally conductive 
  • Pressure sensitive 
  • One component 
  • Contains solvent 
  • High flexibility 
  • High tack 

#Adhesives #channelpartners #protectingyourelectronics

Posted on by — Leave a comment

Product Spotlight – Thermal Grease 65-00-T670-0080 (80cc)

For todays #Product Spotlight we will be focusing on @ParkerChomerics product Thermal Grease 65-00-T670-0080 (80cc)!

Parker Chomerics T670 Thermal Grease has a high performance thermal conductivity of 3.0 W/m-k. With a very thin bond line (0.001 in), its applications range from the simplest to most demanding requirements.

Thermal Grease 65-00-T670-0080 (80cc)

Thermal Grease 65-00-T670-0080 (80cc)

£170.35 ex VAT
Shop now

Features and Benefits:

  • Silicone based materials conduct heat between a hot component and a heat sink or enclosure
  • Fills interface variable tolerances in electronics assemblies and heat sink applications
  • Dispensable, highly conformable materials require no cure cycle, mixing or refrigeration
  • Thermally stable and require virtually no compressive force to deform under typical assembly pressures
  • Supports high power applications requiring material with minimum bond line thickness and high conductivity
  • Ideal for rework and field repair situations

#Chomerics #Thermal #protectingyourelecronics